Configuration Files - Aastra 9000i Series Administrator's Manual

Heading
802.1x Support
Troubleshooting
Enabling/Disabling the Aastra Web UI
The Aastra Web UI is enabled by default on the IP phones. A System Administrator can disable
the Aastra Web UI on a single phone or on all phones if required using the configuration files.
System Administrators can also disable Users ability to login to the Aastra Web UI. With the
Aastra Web UI disabled, users will still be able to lock/unlock the phone with a PIN from the IP
Phone. Administrators can disable the user Web UI using the configuration file. System
Administrators have the option to either disable the Web UI for both the Administrator and User,
enable for both the Administrator and User, or enable the Web UI only for the Administrator.Use
the following procedure to enable and disable the Aastra Web UI.
To disable the Aastra Web UI:

Configuration Files

Step Action
1 Using a text-based editing application, open the <mac>.cfg file if you want to disable the Web UI on a
single phone. Open the aastra.cfg file to disable the Web UI on all phones
2 Enter the following parameter:
web interface enabled: 0
Note: A value of zero (0) disables the Web UI on the phone for Administrators and Users. A value of
(1) enables the Web UI for Administrators and Users. A value of (2) enables the Web UI for
administrators only.
3 Save the changes and close the <model>.cfg, <mac>.cfg or the aastra.cfg file.
4 Restart the phone to apply the changes. The Aastra Web UI is disabled for a single IP phone or for all
phones.
41-001343-01 Rev 02, Release 3.2.2
Description
Allows you to enable/disable the 802.1x Protocol
(Extensible Authentication Protocol (EAP)) to use on the IP
phones for authentication purposes. Applicable choices are
EAP-MD5 or EAP-TLS.
(Applicable to Administrator Only)
Allows you to perform troubleshooting tasks whereby the
results can be forwarded to Aastra Technical Support for
analyzing and troubleshooting. Also displays error
messages if applicable.
Note: You can also specify whether a user can upload
system information automatically or manually by configuring
a parameter in the configuration files. For more information
on this feature, see Chapter 9, the
and Crash File Retreival"
(Applicable to Administrator Only)
section"Configuration
on page 9-15.
2-15