Aastra 9000i Series Administrator's Manual page 584

Aastra Web UI
1 Click on Advanced Settings->Action URI.
2 Enter an XML URI for a startup event in the "Startup" field. For example:
http://10.50.10.140/startup
This parameter specifies the URI for which the phone executes a GET on when a startup event
occurs.
3 Enter an XML URI for a successful registration in the "Successful Registration" field. For example:
http://10.50.10.14/registered.php?auth name=$$SIPAUTHNAME$$
This parameter specifies the URI for which the phone executes a GET on when a successful
registration event occurs.
Note: For a successful registration event, use the associated variables indicated in the table
URIs and Associated Variables"
The "Successful Registration" parameter executes on the first successful registration of each
unique line configured on the phone.
4 Enter an XML URI in the "Registration Event" field, for when the phone performs registration. For
example:
http://10.30.100.39/PHPtests/
actionuri.php?action=RegEvt&regstate=$$REGISTRATIONSTATE$$&regcode=$$REGI
STRATIONCODE$$
This parameter specifies the URI that the phone executes a GET on, when a registration event
change occurs.
Note: For a registration event, use the associated variables indicated in the table
Associated Variables"
41-001343-01 Rev 02, Release 3.2.2
on page 5-303.
on page 5-303.
"Action
"Action URIs and
5-307