Aastra 9000i Series Administrator's Manual page 870

Parameter–
action uri registration
event
Registration Event
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
action uri incoming
Incoming Call
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Configuration Files
Aastra Web UI
Specifies the URI that the phone executes a GET on, when a registration
event change occurs. This parameter uses the following variables to
determine the state of the event:
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$
Note: This action URI is not called when the same event is repeated (for
example, a timeout occurs again when registration is already in a timeout
state.)
String
Not Applicable
Any valid URI
action uri registration event: http://10.30.100.39/PHPtests/
actionuri.php?action=RegEvt&regstate=$$REGISTRATIONSTATE$$&regco
de=$$REGISTRATIONCODE$$
Aastra Web UI
Configuration Files
Specifies the URI for which the phone executes a GET on when an
incoming call event occurs. This parameter can use the following
variables:
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$INCOMINGNAME$
$$LINESTATE$$
$$CALLDURATION$$
$$CALLDIRECTION$$
$$LOCALIP$$
Fully qualified URI
Not Applicable
Up to 128 ASCII characters
action uri incoming: http://10.50.10.140/
incoming.php?number=$$REMOTENUMBER$$
aastra.cfg, <model>.cfg, <mac>.cfg
Advanced Settings->Action URI
Advanced Settings->Action URI
aastra.cfg, <model>.cfg, <mac>.cfg
A-145