Aastra 9000i Series Administrator's Manual page 154

Parameter In
IP Phone UI
Download Path HTTPS Path
Download Port HTTPS Port
Auto-Resync Settings
N/A Mode
41-001343-01 Rev 02, Release 3.2.2
Parameter in Parameters in
Aastra Web UI Configuration Files
https path
https port
auto resync mode
Description
Specifies the path name for which the
configuration files reside on the HTTPS server
for downloading to the IP Phone.
If the IP phone's configuration and firmware files
are located in a sub-directory beneath the
server's root directory, the relative path to that
sub-directory should be entered in this field.
For more information, see Chapter 4,
"Configuration Server Protocol"
Specifies the HTTP port that the server uses to
load the configuration to the phone over HTTP.
For more information, see Chapter 4,
"Configuration Server Protocol"
Enables and disables the phone to be updated
automatically once a day at a specific time in a
24-hour period. This parameter works with
TFTP, FTP, and HTTP servers.
Notes:
1. If a user is accessing the Aastra Web UI,
they are not informed of an auto-reboot.
2. Any changes made using the Aastra Web UI
or the IP phone UI are not overwritten by an
auto-resync update. Auto-resync affects the
configuration files only. However, the
settings in the Aastra Web UI take
precedence over the IP phone UI and the
configuration files.
3. The resync time is based on the local time of
the IP phone.
4. If the IP phone is in use (not idle) at the time
of the resync check, the reboot occurs when
the phone becomes idle.
5. The automatic update feature works with
both encrypted and plain text configuration
files.
For more information, see Chapter 8, the
section, "Using the Auto-Resync Feature"
page 8-7.
on page 4-104.
on page 4-104.
on
3-67