Autodial Settings - Aastra 9000i Series Administrator's Manual

Autodial Settings

Global Settings
Parameter –
sip autodial number
Autodial Number
(in Web UI)
Description
Format
Default Value
Range
Examples
Parameter –
sip autodial timeout
Autodial Timeout
(in Web UI)
Description
Format
Default Value
Range
Examples
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI Advanced Settings->Global SIP->
Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Globally specifies the SIP phone number that the IP phone autodials
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
Integer
Blank
Any valid SIP number
sip autodial number: 8500
Aastra Web UI Advanced Settings->Global SIP->
Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Globally specifies the time, in seconds, that the phone waits to dial a
preconfigured number after the handset is lifted from the IP phone
cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Integer
0
0-120
sip autodial timeout: 30
A-129