Aastra 9000i Series Administrator's Manual page 221

IP Phone UI
Step Action
7 Press VLAN Settings.
8 Press VLAN, and then press Enable.
To set VLAN ID and priority for LAN Port (Port 0):
9 Press LAN Port VLAN..
10 Press LAN Port VLAN ID and then enter a value from 1 to 4094 to specify the VLAN ID for the LAN
Port. Default is 1.
11 Press SIP Priority and then enter a value from 0 to 7 to specify the SIP priority for the LAN Port.
Default is 3.
12 Press RTP Priority and then enter a value from 0 to 7 to specify the RTP priority for the LAN Port.
Default is 5.
13 Press RTCP Priority and then enter a value from 0 to 7 to specify the RTCP priority for the LAN Port.
Default is 5.
14 Press to return to the VLAN screen.
To set VLAN ID and priority for PC Port (Port 1):
15 Press PC Port VLAN..
16 Note: Press PC Port VLAN ID and then enter a value from 1 to 4095 for the PC Port VLAN ID.
Default is 4095. If you set the PC Port VLAN ID (Port 1) to 4095, all untagged packets are sent to this
port. The following is an example of configuring the phone on a VLAN where all untagged packets
are sent to the PC Port (passthrough port).
Example
You enable tagging on the phone port as normal but set the passthrough port (PC Port) to
4095. The following example sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
VLAN Settings->VLAN Enable: Yes
VLAN Settings->Phone VLAN->Phone VLAN ID: 3
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
17 Press Priority and then enter a value from 0 to 7 to specify the PC Port VLAN priority. Default is 0.
To globally enable/disable VLAN and set priority for non-IP packets:
18 On the Network screen, press the Ethernet & VLAN button.
19 Press VLAN Settings.
20 Press LAN Port VLAN.
21 Press Other Priority and enter a value from 0 to 7 to specify the global setting for the LAN port. This
value is also applicable to non-IP packets. Default is 5.
22 Press until the Options List screen displays.
23 Press Restart to restart the phone for the change to take affect.
4-58 41-001343-01 Rev 02, Release 3.2.2