Aastra 9000i Series Administrator's Manual page 216

DSCP Range/VLAN Priority
The following table identifies the default DSCP of protocols.
Configuring Type of Service (ToS)/DSCP (optional)
Use the following procedures to configure ToS/DSCP on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
(ToS)/DSCP Settings" on
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
41-001343-01 Rev 02, Release 3.2.2
DSCP
Range
Protocol
Name
Note: ToS/DSCP is enabled by default. The SIP, RTP, and RTCP
parameters show defaults of 26, 46, and 46, respectively. Use the
following procedures to change these settings if required.
page A-47.
VLAN Priority
0-7 0
8-15 1
16-23 2
24-31 3
32-39 4
40-47 5
48-55 6
56-63 7
Default DSCP
Values in the
ToS Field
sip 26
rtp 46
rtcp 46
"Type of Service
4-53