Error Messages Display - Aastra 9000i Series Administrator's Manual

Ip sip phones
Hide thumbs Also See for 9000i Series:
Table of Contents

Advertisement

Error Messages Display

An Administrator can view generated error messages that may have occurred during startup or
reboot of the IP Phones. The IP Phone UI has a selection on the Phone Status page called, "Error
Messages" at the location, Options->Phone Status->Error Messages. The Aastra Web UI also
allows you to view these error messages at the location Advanced
Settings->Troubleshooting->Error Messages. These options allow you to view error messages
generated by modules during startup only (not after registration has completed). You can use this
information for troubleshooting purposes or for reporting the errors to the Administrator.
The IP Phone stores and displays up to 10 error messages (any extra error messages beyond 10 are
discarded). The time and date of each error message also displays. After a reboot, the previous
error messages are discarded and, if applicable, new error messages display. If there are no error
messages during startup or after a reboot, the message, "No Error Messages" displays on the
screen. Error messages display in the language currently set on the phone.
The following table identifies the possible error messages that may display.
Possible Error Message
Bad Certificate
802.1x Startup Failed
LLDP Startup Failed
HTTP Connection Manager Init Failed
Failed to config Line Manager
41-001343-01 Rev 02, Release 3.2.2
Description
A Transport Layer Security (TLS) certificate
is not valid. The invalid certificate can be
any of the following:
root and intermediate certificate
local certificate
private key filename
trusted certificate
The Extensible Authentication Protocol TLS
(EAP-TLS) certificates and/or the EAP-MD5
information has failed on the phone.
Link Layer Discovery Protocol (LLDP) failed
during startup of the phone.
The Hypertext Transfer Protocol (HTTP)
connection manager initialization failed
while updating the configuration on the
phone.
The configuration of the Line Manager
module on the phone has failed.
9-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

6700i series9000i6700i

Table of Contents