Aastra 9000i Series Administrator's Manual page 274

IP Phone UI
Step Action
9
(Cont'
d)
HTTP Settings
- Press HTTP Server.
- Enter the IP address of the HTTP server.
- Press HTTP Port.
- Enter the HTTP port that the server uses to load the configuration to the phone over HTTP.
Default is 80.
.-Press HTTP Path.
- Enter the path name for which the configuration files reside on the HTTP server for down-
loading to the IP Phone. If the IP phone's files are located in a sub-directory beneath the
server's root directory, the relative path to that sub-directory should be entered in this field.
Enter the path name in the form folderX\folderX\folderX. For example, ipphone\6757i\con-
figfiles.
HTTPS Settings
- Press HTTPS Server.
- Enter the IP address of the HTTPS server.
- Press HTTPS Port.
- Enter the HTTPS port that the server uses to load the configuration to the phone over
HTTPS. Default is 443.
- Press HTTPS Path.
Enter the path name for which the configuration files reside on the HTTPS server for down-
loading to the IP Phone. If the IP phone's files are located in a sub-directory beneath the
server's root directory, the relative path to that sub-directory should be entered in this field.
Enter the path name in the form folderX\folderX\folderX. For example, ipphone\6757i\con-
figfiles.
- Press HTTPS Client Method.
- Select the client method to use for downloading the configuration files (SSl 3.0 or TLS 1.0).
For more information about which client method to use, see the section,
Server Configuration"
9 Press until the Options List screen displays.
10 Press Restart to restart the phone for the change to take affect.
41-001343-01 Rev 02, Release 3.2.2
on page 4-41.
"HTTPS Client/
4-111