Status Scroll Delay - Aastra 9000i Series Administrator's Manual

Status Scroll Delay

The IP phones have a feature that allows you to specify the time delay, in seconds, between the
scrolling of each status message (including XML status messages) on the phone. The default
time is 5 seconds for each message to display before scrolling to the next message. You can
configure this option via the configuration files or the Aastra Web UI.
Reference
For more information about configuring the status scroll delay for XML status messages, see
"XML Customized Services"
Configuring Status Scroll Delay
Use the following procedures to configure Status Scroll Delay.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on page A-141.
Aastra Web UI
1 Click on Basic Settings->Preferences->General.
2 In the "Status Scroll Delay (seconds)" field, enter a value, in seconds, that each XML status
message displays on the phone. Default is 5 seconds. Valid values are 1 to 25.
3 Click
5-78
on page
to save your changes.
5-289.
41-001343-01 Rev 02, Release 3.2.2
"XML Settings"