Configuration File Options - Aastra 9000i Series Administrator's Manual

References
For information about options available to a User AND Administrator in the Aastra Web UI, see
your Model-specific User Guide.
For procedures to Restart your phone or restore factory defaults, see
page 3-14, and
For more information about Advanced Settings for the IP Phone, see
Network and Session Initiation Protocol (SIP) Features."
For procedures on configuring the Basic Settings for the IP Phone, see
Operational Features."

Configuration File Options

An Administrator can enter specific parameters in the configuration files to configure the IP
phones. All parameters in configuration files can only be set by an administrator.
References
For a procedure on using the configuration files, see
(Administrator Only)"
For a description of each parameter you can enter in the configuration files, see
"Configuration Parameters."
41-001343-01 Rev 02, Release 3.2.2
"Set Phone to Factory Defaults/Erase Local Configuration"
on page 2-1.
"Restarting Your Phone"
Chapter 4, "Configuring
Chapter 5, "Configuring
Chapter 2, the section,
on
on page 3-16.
"Configuration Files
Appendix A,
3-9