Aastra 9000i Series Administrator's Manual page 200

Configuring STUN and TURN Servers Using the Configuration Files
Use the following parameters to configure STUN and TURN servers in your network.
• sip stun ip
• sip stun port
• sip turn ip
• sip turn port
• sip turn user
• sip turn pass
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections:
"SIP STUN Parameters"
41-001343-01 Rev 02, Release 3.2.2
Note:
The NAT IP configuration parameter takes precedence
over the STUN and TURN parameters.
on page A-34 and "SIP TURN Parameters" on page A-35.
4-37