Aastra 9000i Series Administrator's Manual page 127

Parameter In
IP Phone UI Aastra Web UI
N/A Time Servers 1, 2,
and 3
N/A STUN Server
N/A STUN Port
N/A TURN Server
N/A TURN Port
3-40
Parameter in Parameters in
Configuration Files
time server1
time server2
time server3
time server4
sip stun ip
sip stun port
sip turn ip
sip turn port
Description
The 1st, 2nd, 3rd, and 4th time server's IP address
or qualified domain name. If the time server is
enabled, the value for time server1 will be used to
request the time from.
For more information, see Chapter 4,
Time Servers" on page 4-63.
IP address of the STUN server (also know as
Simple Traversal of UDP through NAT).
Notes:
1. The UPnP and NAT IP configuration parameters
take precedence over the STUN and TURN
parameters.
2. STUN does not work if the NAT device is
symmetric.
For more information, see Chapter 4,
TURN Protocols" on page
Port number of the STUN server (also know as
Simple Traversal of UDP through NAT).
Notes:
1. The UPnP and NAT IP configuration parameters
take precedence over the STUN and TURN
parameters.
2. STUN does not work if the NAT device is
symmetric.
For more information, see Chapter 4,
TURN Protocols" on page
IP address of the TURN server (also known as
Traversal Using Relay NAT).
Note: The UPnP and NAT IP configuration
parameters take precedence over the STUN and
TURN parameters.
For more information, see Chapter 4,
TURN Protocols" on page
Port number of the TURN server (also known as
Traversal Using Relay NAT).
Note: The UPnP and NAT IP configuration
parameters take precedence over the STUN and
TURN parameters.
For more information, see Chapter 4,
TURN Protocols" on page
41-001343-01 Rev 02, Release 3.2.2
"Network
"STUN and
4-36.
"STUN and
4-36.
"STUN and
4-36.
"STUN and
4-36.