Restore The Network Settings - Oce 31x5e Maintenance Manual

Restore the network settings

Introduction
The connection from a remote workstation to the DAC can be lost because the
changed DAC network configuration does not work. The former network
settings are retained in the DAC memory. You can restore the former network
settings on the DAC using the key operator system.
Before you begin
Enter the key operator system.
1.
Illustration
[80] Restore the network settings
[80] Restore the network settings
Restoring the network settings
Activate the 'Print settings' section.
1.
Open the 'DAC control' card.
2.
Press the 'Network settings' function key.
3.
Press the start key
4.
Check
Exit the key operator system.
1.
Check to insure that the problems have been solved.
2.
Correcting Errors
to confirm.
131