Clearing Jammed Staples In The Saddle Stitcher - Oce CS250 User Manual

Troubleshooting
6
Return the shutter of the staple cartridge holder to its original position.
7
Insert the staple cartridge holder, sliding it along the rails in the
compartment.
– Check that the staple cartridge holder is securely inserted
as far as possible.
8
Close the front door.
Reminder
If stapling still cannot be resumed, even after performing the above procedure, contact your technical
representative.

Clearing jammed staples in the saddle stitcher

!
Detail
For details on clearing misfed paper in the finisher, refer to "To clear a paper misfeed in Finisher FS-519"
on page 6-52.
1
Remove all paper from the finisher.
2
Open the misfeed-clearing door, and then remove all paper.
3
Close the misfeed-clearing door.
4
Raise the output tray, and then push down the staple cartridge
holder to remove it.
CS250/CS240/CS231
6
6-67