Tools Required To Unpack And Prepare The Mx2020 Router For Installation - Juniper MX2020 Quick Start Manual

Tools Required to Unpack and Prepare the MX2020 Router for Installation

Copyright © 2015, Juniper Networks, Inc.
Figure 4: Measurements of the Router Transport Kit Installed on the
MX2020 (Front View)
19.0 in
(48.26 cm)
30.78 in
(78.2 cm)
To unpack the router and prepare for installation, you need the following tools and
equipment:
Standard pallet jack—48 in. (121.92 cm) deep x 27 in. (68.58 cm) wide
Pallet jack attachment (model number MX2000-PLLT-JCK-ADPTR)
Router transport kit (model number MX2K-TRNSPRT-KIT)
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1, 2, and 3
1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten router
transport kit winch mechanism
9/16-in. (14 mm) open-end or socket wrench with extension to remove bracket bolts
from the shipping pallet
Tools Required to Unpack and Prepare the MX2020 Router for Installation
9