Acx500 Chassis; Acx500 Indoor Router Description - Juniper ACX500 Hardware Manual

SEE ALSO
ACX Series Universal Metro Routers

ACX500 Chassis

IN THIS SECTION

ACX500 Indoor Router Description | 47

ACX500 Outdoor Router Description | 49
ACX500 Outdoor Router with PoE Description | 51
Front Panel of an ACX500 Indoor Router | 53
Front Panel of an ACX500 Outdoor Router with PoE | 55
Alarm Contact Port on ACX500 Routers | 57
LEDs on ACX500 Routers | 59
Uplink Ports on ACX500 Routers | 62
Clocking Ports on ACX500 Routers | 65
ACX500 Indoor Router Description
The ACX500 indoor routers contain a total of 10 ports that support 1-Gbps speed, eight of which are
labeled COMBO. At any point of time, you can use a maximum of six ports.
The ports labeled COMBO (combination ports) consist of four Gigabit Ethernet ports that support RJ-45
connectors and four Gigabit Ethernet ports that support small form-factor pluggable (SFP) transceivers.
Out of the four RJ-45 ports, three ports support Power over Ethernet (PoE+ and PoE++).
The two ports that are not part of the COMBO ports are Gigabit Ethernet SFP ports.
On the ACX500, the six ports that you can use at any point of time can be two Gigabit Ethernet SFP
ports (non-combination) and four ports from the COMBO ports.
47