Management Port Connector Pinouts For An Acx5000 Router - Juniper ACX5048 Hardware Manual

NOTE: The ACX5000 router management port can be configured with a small form-factor
pluggable (SFP) transceivers. See the Hardware Compatibility Tool for more information:
https://pathfinder.juniper.net/hct/product/#prd=ACX5000
Table 32: Cable Specifications for Console and Management Connections for the ACX5000 Router
Port on
ACX5000
Routers Cable Specification
Console port RS-232 (EIA-232) serial
cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation

Management Port Connector Pinouts for an ACX5000 Router

The 1000BASE-T RJ-45 management ports use an RJ-45 connector to connect to a management device
for out-of-band management.
Table 33 on page 96 provides the pinout information of the RJ-45 management port connector. An RJ-45
cable is supplied with an ACX5000 router.
Table 33: RJ-45 Management Port Connector Pinouts for an ACX5000 Router
Pin Signal
1 TRP1+
2 TRP1–
3 TRP2+
4 TRP3+
5 TRP3–
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-foot (2.13-meter) long
RJ-45 patch cable
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Maximum Device
Length Receptacle
7 feet RJ-45
(2.13 meters)
328 feet RJ-45
(100 meters)
96