Installing The T640 Router Without A Mechanical Lift; Overview Of Installing The T640 Router Without A Mechanical Lift - Juniper T640 Hardware Manual

CHAPTER 19
Installing the T640 Router Without a
Mechanical Lift

Overview of Installing the T640 Router Without a Mechanical Lift

Copyright © 2017, Juniper Networks, Inc.
Overview of Installing the T640 Router Without a Mechanical Lift on page 179
Tools and Parts Required to Install the T640 Router Without a Mechanical
Lift on page 180
Removing Components from the T640 Chassis on page 180
Attaching the T640 Router Installation Handle on page 190
Installing the T640 Chassis in the Rack Manually on page 192
Reinstalling Components in the T640 Chassis on page 195
To install the T640 router without a mechanical lift:
Review the safety information. To avoid harm to yourself or the router as you install
1.
it, follow the safety guidelines and procedures for working with routers. However,
providing an exhaustive set of guidelines for working with electrical equipment is
beyond the scope of this documentation.
See "General Safety Guidelines for Juniper Networks Devices" on page
Installation Safety Guidelines" on page 511
Verify that the site has been prepared for the router installation.
2.
See "T640 Site Preparation Checklist" on page
Verify that the mounting hardware has been installed.
3.
See"Installing the T640 Mounting Hardware for an Open-Frame Rack" on page 162
or"Installing the T640 Mounting Hardware for a Four-Post Rack or Cabinet" on page
Remove the router from the shipping crate.
4.
See Unpacking the T1600 Router.
Gather the tools required to install the router.
5.
503,
117.
and"T640
159.
179