Installing The T1600 Router Without A Mechanical Lift; Overview Of Installing A T1600 Router Without A Mechanical Lift; Lift; Tools And Parts Required To Install The T1600 Router Without A Mechanical - Juniper T1600 Hardware Manual

CHAPTER 10
Installing the T1600 Router Without a
Mechanical Lift

Overview of Installing a T1600 Router Without a Mechanical Lift

Copyright © 2010, Juniper Networks, Inc.
Overview of Installing a T1600 Router Without a Mechanical Lift on page 101

Tools and Parts Required to Install the T1600 Router Without a Mechanical

Lift on page 102
Removing Components from the T1600 Chassis on page 102
Installing the T1600 Chassis in the Rack Manually on page 112
Reinstalling the T1600 Components in the Chassis on page 115
If you cannot use a mechanical lift to install the T1600 router (the preferred method),
you can install it manually.
To install the T1600 router without a mechanical lift:
Read the safety information. To avoid harm to yourself or the router as you install and
1.
maintain it, follow the guidelines for working with and near electrical equipment, as
well as the safety procedures for working with routers. However, providing an
exhaustive set of guidelines for working with electrical equipment is beyond the scope
of this documentation.
See "General Safety Guidelines for M Series, MX Series, and T Series Routers" on
page 309, "T1600 General Electrical Safety Guidelines" on page 330, and"T1600 Chassis
Lifting Guidelines" on page 316
Verify that the site has been prepared for the router installation.
2.
See "T1600 Site Preparation Requirements Checklist" on page 75.
Verify that the mounting hardware has been installed as described in Installing the
3.
T1600 Mounting Hardware for a Four-Post Rack or Cabinet or Installing the T1600
Mounting Hardware for an Open-Frame Rack .
Remove the router from the shipping crate as described in "Unpacking the T1600
4.
Router" on page 80.
Gather the tools required to install the router.
5.
101