Installing The T640 Router Without A Mechanical Lift; Overview Of Installing The T640 Router Without A Mechanical Lift; Lift; Tools And Parts Required To Install The T640 Router Without A Mechanical - Juniper T640 Hardware Manual

CHAPTER 10
Installing the T640 Router Without a
Mechanical Lift

Overview of Installing the T640 Router Without a Mechanical Lift

Copyright © 2010, Juniper Networks, Inc.
Overview of Installing the T640 Router Without a Mechanical Lift on page 95

Tools and Parts Required to Install the T640 Router Without a Mechanical

Lift on page 96
Removing Components from the T640 Chassis on page 96
Installing the T640 Chassis in the Rack Manually on page 104
Reinstalling Components in the T640 Chassis on page 108
To install the T640 router without a mechanical lift:
Read the safety information. To avoid harm to yourself or the router as you install it,
1.
follow the safety guidelines and procedures for working with routers. However,
providing an exhaustive set of guidelines for working with electrical equipment is
beyond the scope of this documentation.
See "General Safety Guidelines for M Series, MX Series, and T Series Routers" on
page 303, and"T640 Chassis Lifting Guidelines" on page 310
Verify that the site has been prepared for the router installation.
2.
See "T640 Site Preparation Checklist" on page 65.
Verify that the mounting hardware has been installed as described in"Installing the
3.
T640 Mounting Hardware for an Open-Frame Rack" on page 81 or"Installing the T640
Mounting Hardware for a Four-Post Rack or Cabinet" on page 78.
Remove the router from the shipping crate as described in Unpacking the T1600
4.
Router.
Gather the tools required to install the router.
5.
See "Tools and Parts Required to Install the T640 Router Without a Mechanical Lift"
on page 96.
Remove components from the chassis to make it easier to install into the rack or
6.
chassis.
95