3Com 3C13636 Configuration Manual page 299

3Com Router 3000 Ethernet Family
Configuration Guide
III. Configuring the local to be authenticated by the peer using PAP
Table 1-5 Configure the local to be authenticated by the peer with the PAP approach
Configure PAP username and password
that the
authenticated by the peer in PAP mode
Delete the PAP username and password
that the
authenticated by the peer in PAP mode
By default, when the local router is authenticated by the peer in PAP mode, both
username and password sent by the local router are null.
IV. Configuring the local to be authenticated by the peer using CHAP
Table 1-6 Configure the local to be authenticated by the peer with the CHAP
approach
In system view create a local user and
enter its view
In local user view set a password for the
local user
In local user view remove the password
of the local user
Configure the name of the local end
Delete the configured name of the local
Configure
password.
Delete
password
In the above table, simple means to send password in plain text and cipher in
ciphertext.
By default, when the local router is authenticated by the peer in CHAP mode, both
username and password sent by the local router are null.
When configuring PPP CHAP, note the following:
At the authenticator end, create a local user entry for the authenticatee. Only the
password configured in local user view can be used for encryption.
Operation
local will send
local will send
Operation
a CHAP authentication
the CHAP authentication
3Com Corporation
Chapter 1 PPP and MP Configuration
ppp pap
when
password { simple | cipher } password
when undo ppp pap local-user
local-user username
password { simple | cipher } password
undo password
ppp chap user username
undo ppp chap user
ppp chap password { simple | cipher }
password
undo ppp chap password
1-7
Command
local-user username
Command