show ports storm-control
The show ports storm-control Privileged EXEC mode command displays the storm
control configuration.
Syntax
•
show ports storm-control [interface]
interface — A valid Ethernet port. (Full syntax: unit/port)
•
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
Port
----
1/e1
1/e2
1/e3
1/e4
1/e5
1/e6
1/e7
1/e8
1/e9
182
Ethernet Configuration Commands
State
Rate
[Kbits/
Sec]
--------
---------
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Disabled
3500
Included
------------------------------.
Broadcast
Broadcast
Broadcast
Broadcast, Multicast
Broadcast
Broadcast
Broadcast
Broadcast
Broadcast