Table of Contents
Advertisement
5.1 Overview
This chapter provides tutorials for your NBG-418N as follows:
•
How to Connect to the Internet from an AP
•
Configure Wireless Security Using WPS on both your NBG-418N and Wireless Client
•
Enable and Configure Wireless Security without WPS on your NBG-418N
5.2 How to Connect to the Internet from an AP
This section gives you an example of how to set up an access point (AP) and wireless client (a
notebook, B in this example) for wireless communication. B can access the Internet through the AP
wirelessly.
Figure 39 Wireless AP Connection to the Internet
B
5.2.1 Configure Wireless Security Using WPS on both your NBG-418N and
Wireless Client
This section gives you an example of how to set up wireless network using WPS. This example uses
the NBG-418N as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
There are two WPS methods for creating a secure connection. This tutorial shows you how to do
both.
• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a
button. See
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG-418N's interface. See
This is the more secure method, since one device can authenticate the other.
Section 5.2.1.1 on page
58.This is the easier method.
C
H A P T ER
AP
5
Tutorials
Section 5.2.1.2 on page
59.
57
Advertisement
Table of Contents
