The Packet Statistics Screen - ZyXEL Communications LTE3202-M430 User Manual

The following screen describes the labels on this screen.
Table 9 Monitor > ARP Table
LABEL
No.
IP Address
MAC Address
Device
State

5.6 The Packet Statistics Screen

Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status screen. Read
only information here includes port status, packet specific statistics and the "system up time".
Figure 14 Monitor > Packet Statistics
The following table describes the labels on this screen.
Table 10 Monitor > Packet Statistics
LABEL
No.
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/x
Up Time
Chapter 5 Monitor
DESCRIPTION
This is the index number of the entry.
This is the learned IPv4 or IPv6 IP address of a device connected to a port.
This is the MAC address of the device with the listed IP address.
This is the type of interface used by the device.
• LAN indicates a LAN interface where 0 represents LAN1 or LAN2.
• WLAN indicates a connection via WiFi network.
This column shows the current status of the connection.
DESCRIPTION
This is the index number of the entry.
This is the LTE3202-M430's interface type.
For the LAN ports, this displays the port speed and duplex setting or Down when the
line is disconnected.
For the WAN port, it displays Up when the mobile data connection is up, Connecting
when the LTE3202-M430 is trying to bring the mobile data connection up, and
displays Down when the 3G/4G connection is down or not activated.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled
and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the LTE3202-M430 has been for each session.
LTE3202-M430 User's Guide
30