Arp Table; Packet Statistics - ZyXEL Communications LTE3302-M432 User Manual

5.5 ARP Table

Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
network.
Use the ARP table to view IP-to-MAC address mapping(s).
Figure 29 Monitor > ARP Table
The following table describes the labels in this screen.
Table 11 System Monitor > ARP Table
LABEL
#
IP Address
MAC Address
Device
State
Refresh

5.6 Packet Statistics

Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status, packet specific statistics and the "system up time". The Poll
Interval(s) field is configurable and is used for refreshing the screen.
Chapter 5 Monitor
DESCRIPTION
This is the ARP table entry number.
This is the learned IPv4 or IPv6 IP address of a device connected to a port.
This is the MAC address of the device with the listed IP address.
This is the type of interface used by the device.
br0 indicates a LAN interface where 0 represents LAN1 or LAN2.
This column shows the status of the mapping.
Click Refresh to update this screen.
LTE3302-M432 & LTE3312-M432 User's Guide
53