31.3 Packet Capture
Use this screen to capture network traffic going through the NXC's interfaces. Studying these
packet captures may help you identify network problems.
Click Maintenance > Diagnostics > Packet Capture to open the packet capture screen.
Note: New capture files overwrite existing files of the same name. Change the File Suffix
field's setting to avoid this.
Figure 213 Maintenance > Diagnostics > Packet Capture > Capture
The following table describes the labels in this screen.
Table 185 Maintenance > Diagnostics > Packet Capture
LABEL
Interfaces
IP Version
Protocol Type
Chapter 31 Diagnostics
DESCRIPTION
Enabled interfaces appear under Available Interfaces. Select interfaces for which
to capture packets and click the right arrow button to move them to the Capture
Interfaces list. Use the [Shift] and/or [Ctrl] key to select multiple objects.
Select the version of the Internet Protocol (IP) by which traffic is routed across the
networks and Internet. Select any to capture packets for traffic sent by either IP
version.
Select the protocol type of traffic for which to capture packets. Select any to capture
packets for all types of traffic.
NXC Series User's Guide
358