Chapter 7 The WAN Configuration Screens
Radio frequency is measured in Hertz (Hz).
Table 27 Radio Frequency Conversion
1 kHz = 1000 Hz
1 MHz = 1000 kHz (1000000 Hz)
1 GHz = 1000 MHz (1000000 kHz)
Figure 36 ADVANCED > WAN Configuration >WiMAX Configuration
The following table describes the labels in this screen.
Table 28 ADVANCED > WAN Configuration >WiMAX Configuration
LABEL
DL Frequency /
Bandwidth [1~19]
Apply
Reset
96
DESCRIPTION
These fields show the downlink frequency settings in kilohertz (kHz).
Enter values in these fields to have the WiMAX Device scan these
frequencies for available channels in ascending numerical order.
Note: The Bandwidth field is not user-configurable; when the
WiMAX Device finds a WiMAX connection, its frequency is
displayed in this field.
Contact your service provider for details of supported frequencies.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide