Radio List - ZyXEL Communications NXC2500 User Manual

Table 37 Monitor > Wireless > AP Information > AP List > Config AP (continued)
LABEL
OK
Cancel

5.12 Radio List

Use this screen to view statistics about the wireless radio transmitters in each of the APs connected
to the NXC. To access this screen, click Monitor > Wireless > AP Information > Radio List.
Figure 36 Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Table 38 Monitor > Wireless > AP Information > Radio List
LABEL
More
Information
#
Loading
AP Description
Model
MAC Address
Radio
OP Mode
AP / ZyMesh
Profile
Frequency Band
Channel ID
Tx Power
Chapter 5 Monitor
DESCRIPTION
Click OK to save your changes back to the NXC.
Click Cancel to close the window with changes unsaved.
DESCRIPTION
Click this to view additional information about the selected radio's SSID(s), wireless traffic
and wireless clients. Information spans a 24 hour period.
This is the radio's index number in this list.
This indicates the AP's load balance status (UnderLoad or OverLoad) when load
balancing is enabled on the AP. Otherwise, it shows - when load balancing is disabled or
the radio is in monitor mode.
This displays the description of the AP to which the radio belongs.
This displays the model of the AP to which the radio belongs.
This displays the MAC address of the radio.
This indicates the radio number on the AP to which it belongs.
This indicates the radio's operating mode. Operating modes are AP (access point), MON
(monitor), Root AP or Repeater.
This indicates the AP radio and ZyMesh profile names to which the radio belongs.
This indicates the wireless frequency currently being used by the radio.
This shows - when the radio is in monitor mode.
This indicates the radio's channel ID.
This shows the radio's output power (in dBm).
NXC Series User's Guide
78