Table of Contents
Advertisement
108 / System-wide call appearance (SWCA) codes
For other displays, see
System-wide call appearance (SWCA)
codes
This feature allows a call to maintain an appearance on buttons
assigned with SWCA codes to a group of users.
SWCA buttons can be assigned to memory buttons using
to
on page 147 for general information about setting or
button
changing button programming for a telephone.
SWCA codes can also be assigned when the telephone DN
record is set up. Visible assignments are set up in button
programming. Non-visible assignments are set up on the
SWCA call groups setting under Capabilities. For the latter
group, users use the actual SWCA codes to park and retrieve
the calls. Since there is no visibility to the users without button
assignments, users must employ the voice call or page feature
to provide the call location to other users.
Modular ICS 7.1 System Coordinator Guide
Record the code shown. Use Page
(
call and its retrieval code.
All available retrieval codes are in use.
Transfer the call or take a message instead.
Common feature displays
to assign the SWCA feature codes:
. See
Programming a feature code onto a memory
Code change - Software releases prior to
MICs 7.0 used a SWCA range of
first code was previously assigned as a SWCA
code, reprogram that button for the affected
telephones.
) or press
to announce the
on page 249.
to
. If the
N0130946 01
Advertisement
Table of Contents
