Downloading Data - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Downloading Data

7-1

Downloading Data

74
Use the following procedure to download edited project data from the (CX-
Position) computer to the NC Unit.
1,2,3... 1. On the project tree, select the NC Unit to be downloaded to.
2. Select Online (L)/Download (D).
3. Select the data to be downloaded under Data Type. To download all data,
select All Data. To designate specific data to be downloaded, select Setting
Data and then the specific data. Clicking the Change Data Button will se-
lect only the data that has been changed.
4. Click the OK Button. (Click the Cancel Button during data loading to stop
the download.)
Section 7-1