Zen Image Display - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

ZEN Image Display

5-2

ZEN Image Display

Note To display or hide the ZEN Image Window, click the ZEN Image
Input Switch Symbols
Present Value List
Display
Clock Display
Start/Stop
Simulator
CPU Unit and Expansion I/O Unit images are displayed according to
the configuration in the property settings, and input switches and
lamps are allocated to the I/O bits used in the ladder program.
Operation button symbols
Input switch symbols
Lamp symbols
Display bit (D) display
Display Button on the Toolbar.
Input switch specifications can be changed by right-clicking the input
switch symbol.
Symbol Input
specifications
Momentary: NO
condition
Momentary: NC
condition
Specifies whether or not the Present Value
List Window will be displayed.
Specifies whether or not the Clock Window
will be displayed.
Starts and stops the Simulator.
Operation
Normally OFF.
ON only when left mouse button is held
down.
Normally ON.
OFF only when left mouse button is held
down.
Section 5-2
63