Table of Contents
Advertisement
7.3.5
Media Stream
•
Media Stream
You can display the established media streams from a camera. You may also set the camera so it
transmits code streams by the UDP or TCP protocol to a specified IP address and port number. The
settings can be saved and take effect after the camera is restarted.
NOTE!
1. This function is not supported by some models. Please see the actual model for details.
Choosing a transport protocol based on your actual needs and network performance.
2.
Generally speaking, TCP enables better image quality than UDP but also causes higher
latency.
1.
Click
, select a stream type, and then set the IP address and port number of the unicast or multicast
group for the decoding device that receives audio and video streams from the camera.
If you want the device to establish the media stream that has been configured before automatically after
the restart, select Yes for Persistent.
2.
To delete a stream, click
3.
Click Submit to complete the operations.
•
RTSP Multicast Address
After an RTSP multicast address is configured, the third-party player can request the RTSP multicast
media stream from the camera through the RTP protocol.
.
57
UNI IP Series Network Cameras – H265, 2MP / 5MP
Advertisement
Table of Contents
