EverFocus UNI IP Series User Manual page 139

NOTE!
1. Diagnosis information is exported to the local folder in form of a compressed file. You
need to decompress the file using a tool such as Win RAR and then open the file using
a text editor.
2. By selecting Collect Image Debugging Info, you can display video with debugging
information at the same time, which makes troubleshooting easier.
• Focus Configuration
The device can adjust the speed of auto-focus according to the minimum focus distance. In order to
shoot clear objects, it is recommended that the minimum focus distance is set shorter than the distance
between the objects and lens, for example, if the minimum focus distance is 3m, then the objects within
3m from lens will be out of focus.
NOTE!
This function is only supported by the devices with auto-focus. Please see the actual model for
details.
1. Click Setup>System>Maintenance.
2. Under Focus, configure Min. Focus Distance (unit: cm) and Max. Zoom Ratio.
3. Click OK.
• Device Mounting Height
Enter the actual height from the installed infrared dome to the ground, so that the dome will be able to
automatically adjust its infrared lamp.
NOTE!
This function is only supported by some infrared cameras. Please see the actual model for
details.
1. Click Setup>System>Maintenance.
2. Enter the actual height from the installed Infrared Dome to the ground.
3. Click OK.
UNI IP Series Network Cameras – H265, 2MP / 5MP
132