Table of Contents
Advertisement
7.2.7
SNMP
SNMPv3 is recommended when a camera needs to transfer configuration with the central server. Both the
camera and the central server should support SNMPv3.
NOTE!
Two options are available: SNMPv3 (default) and SNMPv2.
If you choose SNMPv2, an onscreen message will remind you of potential risks and ask if you want to
continue.
1.
Select SNMPv3 and complete settings.
2.
Click Save.
On the SNMPv2 setting page, Read-Only Community Name is used for two-way authentication between a
camera and the central server. The default name is public, and you may change it as needed. If you change the
Read-Only Community Name, you should change it into the same one on the central server, or the two-way
authentication will not be completed.
UNI IP Series Network Cameras – H265, 2MP / 5MP
50
Advertisement
Table of Contents
