EverFocus UNI IP Series User Manual page 109

triggered.
Note:
Please set Post-Record(s) on the Storage page first. Post-Record(s)specifies how long
recording continues after the end of an alarm.
With Alarm the Center selected, the camera will sends alarm information to the central
server when an alarm is triggered.
Alarm the
Center
Note:
Please complete settings on the Server page first.
With Upload Image(Original) selected, The camera uploads the snapshot original image
to the server or platform .
Upload
Image(Original)
Note:
Make sure you have completed FTP and Snapshot before using this function.
With Upload Image( Object) selected, The camera uploads the snapshot object image to
Upload
the server or platform.
Image(Object) Note:
Make sure you have completed FTP and Snapshot before using this function.
With Attribute Collection selected, The camera uploads the attribute information to
the server or platform.
Attribute
Note:
Collection
Only some camera models support this function.

Please set attribute collection on the Attribute Collection page first.

With Trigger Tracking selected, the camera starts auto tracking when an alarm is
triggered.
Trigger Tracking
Note:
Only some camera models support this function.

Please set auto tracking on the Smart Settings page first.

With Trigger E-mail selected, the camera will automatically send snapshots to the
specified E-mail address when an alarm is triggered.
Trigger E-mail
Note:
Make sure you have completed E-Mail before using this function.
Select the check box and set the start and end times during which motion detection
alarm is effective. You can directly drag the mouse to draw a plan and click Edit to edit
time periods in the table. The time periods cannot overlap. The camera reports alarms
Enable Plan
during the specified period(s) only.
You can select from Monday to Sunday and set four periods for each day.
UNI IP Series Network Cameras – H265, 2MP / 5MP
102