Network - EverFocus UNI IP Series User Manual

7.2 Network

Modify communication settings such as the IP address for the camera so that the camera can
communicate with other devices.
7.2.1 Network
NOTE!
After you have changed the IP address, you need to use the new IP address to log in.
The configurations of DNS (Domain Name System) server are applicable when the device is accessed by
domain name.
• Static Address
Select Static from the Obtain IP Address drop-down list.
Enter the IP address, subnet mask, and default gateway address. Make sure that the IP address of the camera
is unique in the network.
Click Save.
• DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered. If a
DHCP server is deployed in the network, the camera can automatically obtain an IP address from the DHCP
server.
To manually configure DHCP, follow the steps below:
Select DHCP from the Obtain IP Address drop-down list.
UNI IP Series Network Cameras – H265, 2MP / 5MP
44