Ddns - EverFocus UNI IP Series User Manual

4. Enable Port Mapping and select mapping type. If Manual is selected, then external ports must be
configured (external IP is obtained automatically by the camera). If the configured port is occupied, then the
Status will show Inactive.
5. Click Save.
7.2.4

DDNS

You can configure the DDNS setting on this page. DDNS (Dynamic Domain Name System) is a service used
to map a domain name to the dynamic IP address of a network device. You can set up the DDNS service
for remote access to the IP Camera.
DDNS assigns a domain name (URL) to the IP Camera, so that the user does not need to go through the
trouble of checking if the IP address assigned by DHCP Server has changed. Once the IP is changed, the IP
Camera will automatically update the information to the DDNS to ensure it is always available for remote
access.
Note:
1.This function is not supported by some models. Please see the actual model for details.
2.Before enabling the following DDNS function, user should have applied for a host name from the
DDS service provider's website.
DDNS: Click to enable the DDNS function
DDNS Type: Select a DDNS service provider from the drop-down list. Note that before enabling the
following DDNS function, user should have applied for a host name from the DDS service provider's
website.
UNI IP Series Network Cameras – H265, 2MP / 5MP
47