Table of Contents
Advertisement
2 Getting Started
This section explains how to access the Web interface of the camera for configuration.
2.1 Checking the Dynamic IP Address
You can look up the IP address of the IP camera using the IP Utility (IPU) program. Please download the
IP Utility from EverFocus website (key word search: "IP Utility"). Please connect the IP camera on the
same LAN of your computer.
1. Save IP Utility Setup .exe
instructions to install the IP Utility.
2. Click the Finish button, the IP Utility will be automatically launched to search the IP devices
connected on the same LAN.
EZN2850-SG
Note: The default IP mode of the IP camera is DHCP. However, if there is no dynamic IP address
assigned to the device, its IP will switch to 192.168.1.13.
UNI IP Series Network Cameras – H265, 2MP / 5MP
in your computer. Double click the .exe file and follow the on-screen
EZN2850-SG
3
Advertisement
Table of Contents
