Table of Contents
Advertisement
5.
Click Save.
CAUTION!
Strictly follow the sequence when powering on the devices to avoid damaging camera
components:
1. Check that the alarm type is set to Normally Open (default setting), and that the camera and
the alarm output device are powered off.
2. After completing the connection, power on the camera first and then power on the alarm
output device.
7.6.3 One-Key Shielding Linkage
The linkage action will not take effect within the disarm time.
1.
Select [Configuration > Alarm > One Key Shielding Linkage] to enter the interface.
2.
Select the Shielding mode.
Periodic Shielding: Weekly as the period, every planned week will execute the disarming action. For
example, if you plan to disarm switch linkage every Saturday, then configure "Disarm Mode" as "Cycle
Plan", and select "Saturday" as the shielding time.
One-time disarm: Disarm for a specified period of time linkage.
(1) Select the shielding linkage item. Supported linkage items include sound alarm, light alarm, sending
email, and switch value. Linkage functions supported by different devices are different, please refer to the
actual interface.
(2) Configure the shielding time. All linked items share a shielding plan, that is, when there are multiple
linked items that need to be disarmed, it is necessary to ensure that the disarming time is the same.
Cycle Schedule: Click
to configure the shielding time.
111
UNI IP Series Network Cameras – H265, 2MP / 5MP
Advertisement
Table of Contents
