Registration Info; Watermark - EverFocus UNI IP Series User Manual

NOTE!
1. If Filtering Mode is set to White list, then only the added IP address(es) are allowed
to access the camera. If Filtering Mode is set to Deny Access, then only the added IP
address(es) are not allowed to access the camera.
2. Up to 32 IP addresses are allowed. Each IP address can be added once only.
3. The first byte of each IP address must be 1-223, and the fourth cannot be 0. For
example, the following IP addresses are illegal and cannot be added: 0.0.0.0,
127.0.0.1, 255.255.255.255, 224.0.0.1.
7.8.2.5 Access Policy
Click Setup>Security > Network Security>Access Policy.
Select On to enable Illegal Login Lock and MAC Authentication.
Click Save
7.8.3

Registration Info

You can set to hide the vendor information of the network camera on the Web interface.
Click Setup>Security> Registration Info.
Under Registration Info, select On.
Click Save.
7.8.4

Watermark

Use watermark to encrypt custom information with video to prevent unauthorized delete or alteration.
NOTE: Only some camera models support this function.
Click Setup>Security>Watermark.
Select On to enable watermark, and then input watermark content.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
122