Table of Contents
Advertisement
4.
Set Max. Size and Min. Size under Filter by Object Size. Only objects within the size range will
be counted; others will be filtered and not counted. The maximum width or height must be
greater than the minimum width or height.
5.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
the descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
6.
To reset counting results, click Clear Counting Result.
7.
Click Save.
7.5.1.11
Auto Tracking
The camera automatically tracks an object that triggers the rule.
NOTE!
1. Only some camera models support this function.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
Click Setup >Intelligent>Smart. Choose Auto Tracking and then click
1.
Set tracking timeout (unit: sec) and zoom ratio.
2.
With Continuously Track selected, the camera continuously tracks an object that triggers the
rule until target cannot be detected.
3.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
88
.
Advertisement
Table of Contents
