Table of Contents
Advertisement
7.5.1.14
Scene Change Detection
NOTE!
1. Only some camera models support this function.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
Use scene change detection to detect the change of surveillance environment caused by external factors
such as intentional rotation of the camera, and to report an alarm when such an event is detected.
Click Setup >Intelligent>Smart. Choose Scene Change and then click
1.
Select Scene Change Detection.
2.
Set detection sensitivity.
3.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
the descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
4.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
91
.
Advertisement
Table of Contents
