Table of Contents
Advertisement
7.4
Image
7.4.1
Image
NOTE!
The image parameters displayed and value ranges allowed may vary with camera model. For the
actual parameters and value ranges of your camera, see the Web interface. You may move the
sliders to adjust settings or enter values in the text boxes directly.
Clicking Default will restore all the default image settings.
•
Setting the scene
Set image parameters to achieve the desired image effects based on live video in different scenes.
Click Setup>Image>Image.
The scene management page for some models is displayed as follows, you can select the desired scene
in the drop-down list.
The scene management page of some models is displayed as follows, you can take the following steps to
configure the scene.
1.
Click Scenes.
2.
Select a scene, and then set scene switching parameters. The following table describes some major
parameters.
Column
Current
Indicates the scene that is being used.
Note:
Select an option button to switch to the scene and display the corresponding image
parameters for the scene.
The camera switches the current scene automatically when Enable Auto Switching is
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
59
Advertisement
Table of Contents
