Table of Contents
Advertisement
•
Advance
Use the defog function to adjust the clarity of images captured in fog or haze conditions.
Click Setup>Image>Image and then click Advanced.
NOTE!
You can set this parameter only when WDR is turned off.
Only some camera models support optical defog. When Defog is set to On, defog intensity level 6-9
represent optical defog, and images change from color to black/white when defog intensity is set from
level 5 to 6;if Defog is set to Auto and defog intensity level is somewhere between 6-9, images do not
automatically change to black/white in light fog conditions; the camera automatically switches to optical
defog only in heavy fog conditions.
Enable the defog function and then select a level for the scene. Level 9 achieves the maximum
defog effects, and level 1 achieves the minimum.
To restore the default settings, click Default.
Defog Off
UNI IP Series Network Cameras – H265, 2MP / 5MP
Defog On
69
Advertisement
Table of Contents
