Table of Contents
Advertisement
NOTE!
Before you set cache post recording for a camera, check that:
1.
The memory card is correctly installed on the camera.
2.
Backup resource has been added on the central server.
3.
Backup resource has been allocated for the camera.
4.
Post-Record is displayed if the camera is capable of this feature; This parameter is not
displayed if not supported by the camera
•
Disable edge storage
Click Setup>Storage>Storage.
1.
Set Storage Policy to Off. Post-Record is displayed if the camera is capable of this feature and
then set Post-Record(s).
2.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
116
Advertisement
Table of Contents
