EverFocus UNI IP Series User Manual page 138

• Importing and Exporting System Configuration File
Export the current configurations of the camera and save them to the PC or an external storage medium.
You can also quickly restore configurations by importing backup configurations stored on the PC or an
external storage medium back to the camera.
CAUTION!
After you perform the Default operation, all settings are restored to factory defaults,

except the following: login password of the system administrator, network settings,
and system time.
Make sure you import the correct configuration file for your camera. Otherwise,

unexpected results may occur.
The camera will restart when the configuration file is imported successfully.

1. Click Setup>System>Maintenance.
2. To import configurations that you have backed up, click Browse next to the Import button and
select the configurations you want to import, and then click Import. The result will be
displayed.
3. To export current system configurations, click Browse (next to the Exporting field), set the
destination and then click Export.
4. To restore default configurations, click Default and then confirm the operation. The device will
restart and restore the default configurations. Clicking Default with the check box selected will
completely restore the device to factory default settings.
• Collecting Diagnosis Information
Diagnosis information includes logs and system configurations. You can export diagnosis information to
your PC.
1. Click Setup>System>Maintenance.
2. In the Diagnosis Info area, click Browse to set the destination and then click Export.
UNI IP Series Network Cameras – H265, 2MP / 5MP
131