Table of Contents
Advertisement
•
Lighting Type
NOTE!
This function may vary with models. Please see the actual model for details.
Click Setup>Image>Image and then click Smart Illumination
Select an option from the Lighting Type drop-down list.
To restore the default settings, click Default.
•
Configuring Iris and Lens Mode
NOTE!
This function is only supported by certain IP camera types. Please see the actual model for details.
Please use the lens with P-Iris control mode, and connect the iris control cable to the Z/F port of the
camera.
Iris can be set only when Lens Mode is set to P-IRIS.
Click Setup>Image>Image and then click Advanced.
Modify the settings as required. The following table describes some major parameters.
Parameter
Lens Mode
Aperture
Control
F-Number
To restore the default settings, click Default.
Z/F: to modify focus and zoom.
P-Iris: to modify iris value.
Automatically or manually adjust iris.
Note:
You can set this parameter only when Lens Mode is set to P-Iris.
Change aperture manually.
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
70
Advertisement
Table of Contents
