EverFocus UNI IP Series User Manual page 67

Column
selected.
Name of the current scene. The device provides several preset scene modes. When you
select a scene, the corresponding image parameters are displayed. You can adjust
image settings according to actual needs.



Scene Name




Indicates whether to add a scene to the auto-switching list.
Note:
Auto Switching
If Auto Switching is selected, the system switches to a scene automatically when the
condition for switching to the scene is met. By default the auto-switching list includes
the default scene.
Click
current elevation (angle between the PTZ and the horizontal direction). It means that
Setup auto-switching is triggered only when illumination and the current elevation during the
set time period meet the set conditions. A condition is invalid if both the start and end
values are set to 0.
3. Select a scene and then click
4. If auto-switching is enabled, the camera can switch to the scene automatically when the condition for
switching to a non-default scene is met. Otherwise, the camera remains in the default scene. When
auto-switching is not enabled, the camera remains in the current scene.
NOTE!
If Auto Switching is enabled (scene settings will be unavailable), the device will switch between the set
scenes. If not, the device will stay at the current scene. The device will stay at default scenes unless the
non-default scenes are triggered.
If multiple non-default scenes are triggered, then the device will switch to the scene with the minimum
number (starts from 1 to 5).
Common: recommended for outdoor scenes.
Indoor: recommended for indoor scenes.
High Sensitivity: recommended for low light environment.
Highlight Compensation: Suppress strong light such as headlights on roads and
spotlight in parks. Recommended for capturing vehicle license plates.
WDR:recommeded for scenes with high-contrast lighting, such as window,
corridor, front dooror other scenes that are bright outside but dim inside.
Custom: set a scene name as needed.
Face: Capture faces in motion in complicated scenes.
to set conditions for auto-switching, including schedule, illumination, and
to set it as the default scene.
60
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description