Stream Settings - EverFocus 288 Series User Manual

7.2.1.2. Stream Settings

Compress Type: Select from Main Stream or Sub Stream.
Stream: Select from Video Stream (video only) or Complex Stream (video & audio).
Resolution: Select the most suitable resolution for your needs.
Frame Rate: Select from 1fps to Full Frame. The default frame rate is Full Frame.
Video Format: Select the encoding format – H.265 or H.264.
H264 Profile: Select the video coding level from Main Profile, Baseline or High Profile.
GOP: Enter the I-frame interval time from 2 to 255 to adjust the frequency of generating I-frames
per second.
Bitrate Type: If required, select whether you want the stream to stream a Constant Bit Rate or a
Variable Bit Rate, and set the values of whichever option you choose.
Bitrate: For Constant Bit Rate only. Select the desired Bit Rate from the drop-down list or
enter a customized Constant Bit Rate (16 to 8000 kbit) in the
Max Bitrate: For Variable Bit Rate only. Select the desired Max Bit Rate from the drop-down
list or enter a customized Max Bit Rate (16 to 8000 kbit) in the
Quality: For Variable Bit Rate only. Select the desired front end devices video coding quality,
from Lowest to Highest.
After complete the settings, click Save to apply the changes.
Note: If you connect to the camera via the Internet and experience a delay (lag time) in the
video feed, try to reduce the quality and resolution of the streams – but keep the frame rate
at its maximum.
54
Value IP 288 / 368 / 468 Series
Kbps field.
Kbps field.